Before even getting started lets make sure you have
at least the minimum hardware required to do anything with this software.
For the best tuning experience you will need a combination of datalogging and emulation.
This could be done with Ostrich 2.0 and Hulog.
Or if you wanted a single device for both tasks.
A Moates Demon 2, CobraRTP, Hondarulez ECUTamer, or SnakeEMU emulation unit.
You can find more about these devices on google.
Next you need to make sure you have a supported ECU.
This is a OBD1 Honda ECU.
You can identify this by the type of plug it has on it.
More info can be found in the ECU Socketing/Chipping section.